Though retrofits can be a little bit tricky, they're not impossible. If your sink has a sprayer, you may be able to remove the sprayer and use the hole that it occupied.

Or, if you have a separate spout for purified water, you can replace that one with a hot-and-cold model.

Or check to see if the sink has an extra hole that hasn't been punched out yet. In a real pinch, you can have a plumbing contractor drill a hole in stainless steel or porcelain, though you risk cracking porcelain.

Though units sold through specifiers such as designers, kitchen shops, and wholesale plumbing houses are generally installed by plumbers, those sold through home centers, major department stores, and hardware stores come with complete instructions for do-it-yourself installation.

Why we like it: • Tall, rounded gooseneck shape • Single lever control • Satin nickel finish

With most, a "saddle valve" is clamped onto the water pipe, and then the appliance is connected to this valve with ¼-inch copper tubing, using compression fittings. Most appliances have a 3-pronged plug that you simply plug into a grounded, 15-amp receptacle (in some cases, they may share the receptacle used by a garbage disposal, but be sure to follow the manufacturer's directions and honor local building codes).