Hydrojets propel water into a spa, providing the high-pressure massage action so treasured by spa owners. A hydrojet mixes a pressurized stream of water with air and then forces it into the spa to create a bubbling swirl. Each hydroject pumps out between 12 and 15 gallons of water per minute, and most spas contain at least four jets.

Two-speed pumps are often used for spas. The higher speed is used to power the hydrojets; the lower speed operates the circulation through the filter and heater--and saves energy when the spa is not in use.

Hydrojets do not have to be fixed in one orientation; in the best spa models, they move up and down to create a rippling massage. And in many spas, including prefabricated ones, you may be able to choose the exact location of the hydrojets.

If you can, sit in the spa before you purchase it so the hydrojets can be placed to your preference. The air intake on a hydrojet can be regulated by opening or closing the ports near the top edge of the spa.

When the ports are completely closed, hydrojects produce a gentle rather than a rippling massage. With ports fully open, some models are able to spew out more than 75 gallons per minute, all through a single jet, to create an inviting whirlpool bath.

One drawback of hydrojets is that their blowers tend to be noisy. When a spa is inside the house, this can result in unbearable sound for everyone but the spa users. But when a spa is connected to an in-ground pool, blowers can usually be located far enough from the spa, with the other pool equipment, to minimize the impact of the noise.

Swimming Pools & Spas
All you need to know about planning and installing a pool. Also, guides to pool equipment and components. Includes an idea gallery with breathtaking pool photography.